Keeler Wall Unit Instructions
Carefully read the instructions before using your Keeler product. For your own
safety and that of your customers observe all cautionary information provided
in this section. The following information is intended to highlight potential safety
hazards that can be associated with misuse, or damage.
Warning
This product must not be used in the presence of flammable gases.
Do not dissemble or modify the product in any way. There are no
serviceable parts inside.
If the product emits a strange odour, heat or smoke, stop use and
disconnect from the mains.
The continued use of a damaged product or part may cause injuries.
Do not immerse the unit in any liquid.
Do not use unit if damaged and periodically visually inspect for signs of dam-
age.
Keeler cord handles attached to a mains unit provide a 3.6v output to the instru-
ment head. Care must be taken to ensure that only instrument heads fitted with
a 3.6V bulb are connected.
Caution
Do not fit into damaged electrical supply outlet
For indoor use only (protect from moisture)
To prevent condensation from forming, allow instrument to come to room tem-
perature before use.
When connecting instrument heads to handles check that voltage of the bulb in
the instrument
corresponds with the voltage of the handle.
Ensure that the control is in the off position when the examination has been
completed.
!
