To activate the device through the Internet Explorer:
1. Connect a network cable to the network port on the front panel (default IP of
LAN1
:
192.168.1.100) of the device.
2. Add an IP address from the 192.168.1.X network segment with the subnet mask being
255.255.255.0 to your PC.
3. Enter the IP address (default: 192.168.1.100) of the device into the address bar of your web
page browser.
4. In the displayed window, click
Click here to download
to install the NVR web add-on.
5. Close your web page browser.
6. Repeat step 2 after the add-on is installed.
7. In the
Log In
dialog box, create a strong password, confirm the password, and enter a mail
address for password resetting.
Activation and Initial Configuration
12
The more a password contains special characters, the stronger the password is.
You are advised to use a strong password to ensure your data safety. Periodically changing
your password at 3-month intervals would be appreciated. If your network environment is
risky, you should change your password at weekly or monthly intervals. Additionally, do not
leak your username and password.
8. Click
Activate
.
Содержание SVR2420 Series
Страница 1: ...Installation Guide SVR2420 Series Mobile PoE NVRs ...
Страница 16: ...14 This page is intentionally left blank ...
Страница 17: ...15 This page is intentionally left blank ...
Страница 20: ......