Slide the HDD carrier back into the chassis.
Install the two screws near the HDD carrier handle back.
Turn the key clockwise to lock the HDD carrier.
Take the key back to the key slot.
12.
13.
14.
15.
2 Installing the Device
Put the device in the trunk or under a passenger seat. Then, note the following.
To power on the device, turn on your car engine.
To power off the device, shut your car engine off.
For details on how to use the device, see the user guide inlcuded in the KEDACOM
Document and Utility CD.
After the device is powered on, check whether the indicators on the front panel are normal. If
not, contact the local authorized Kedacom agent.
Typical Network Topology
Decoder
VMS
Video wall
CU of the VMS
Network
PMC of the VMS
SVR2420
Vehicle PTZ Camera
Network
Warning:
The device does not support hot swapping for HDDs, indicating that you must power off
the device before you can install or uninstall HDDs.
11
Содержание SVR2420 Series
Страница 1: ...Installation Guide SVR2420 Series Mobile PoE NVRs ...
Страница 16: ...14 This page is intentionally left blank ...
Страница 17: ...15 This page is intentionally left blank ...
Страница 20: ......