background image

WHAT IS COVERED BY THIS WARRANTY?

Kedacom warrants the Kedacom-branded hardware product and accessories contained in the original 
packaging (hereinafter referred to as "Kedacom Product") against defects in materials and workmanship when 
used normally in accordance with Kedacom's published guidelines for a period of TWO (2) YEARS from the 
date of original retail purchase in areas other than mainland China by the end-user purchaser (hereinafter 
referred to as "Warranty Period"). For the Kedacom Product purchased in mainland China, see the simplified 
Chinese version of this warranty for details. Kedacom's published guidelines include but are not limited to 
information contained in technical specifications, user guides, and service communications.
The preceding applies unless otherwise agreed in the contract.

Kedacom Two (2) Year Limited Hardware Warranty

WHAT IS NOT COVERED BY THIS WARRANTY?

This warranty does not apply to any non-Kedacom branded hardware products or any software, even if 
packaged or sold with Kedacom hardware. Manufacturers, suppliers, or publishers, other than Kedacom, may 
provide their own warranties to you but Kedacom, in so far as permitted by law, provides their products "AS IS". 
Software distributed by Kedacom with or without the Kedacom brand (including, but not limited to system 
software) is not covered by this warranty. Please refer to the licensing agreement accompanying the software 
for details of your rights with respect to its use. Kedacom does not warrant that the operation of the Kedacom 
Product will be uninterrupted or error-free. Kedacom is not responsible for damage arising from failures to 
follow instructions relating to the Kedacom Product's use.

This warranty does not apply: (a) to consumable parts, such as batteries, unless failure has occurred due to a 
defect in materials or workmanship; (b) to cosmetic damage, including but not limited to scratches, dents, and 
broken plastic on ports; (c) to damage caused by use with another product; (d) to damage caused by acts 
outside the control of Kedacom, including without limitation acts of God, accidents, abuse, misuse, fire, 
storms, earthquakes, flood, or other external cause; (e) to damage caused by exposure of the product to heat, 
bright light, sun, liquids, sand, or other contaminants; (f) to damage caused by operating the Kedacom Product 
outside Kedacom's published guidelines; (g) to damage caused by service (including upgrades and 
expansions) performed by anyone other than a representative of Kedacom, Kedacom employee, or authorized 
Kedacom agent; (h) to an Kedacom Product that has been modified to alter functionality or capability without 
the written permission of Kedacom; (i) to defects caused by normal wear and tear or otherwise due to the 
normal aging of the Kedacom Product, or (j) if any serial number has been removed or defaced from the 
Kedacom Product.

YOUR RESPONSIBILITIES

If your Kedacom product is capable of storing data and other information, you should make periodic backup 
copies of the information contained on the storage media to protect the contents and as a precaution against 
possible operational failures.

Before receiving warranty service, Kedacom or its authorized agents may require that you furnish proof of 
purchase details, respond to questions designed to assist with diagnosing potential issues, and follow 
Kedacom's procedures for obtaining warranty service. Before submitting your Kedacom Product for warranty 
service, you should maintain a separate backup copy of the contents of its storage media, remove all personal 
information that you want to protect, and disable all security passwords.

Содержание NVR1827





























Отзывы: