Kedacom NVR1827, Руководство по установке

Страница: 19 / 28

8
Secure two L-shaped hangers to the device with the four included screws. 3.
Place the device on the rack tray.
Fasten the hangers to the rack with screws provided by the rack manufacturer through the
four holes in the hangers. 4.
5.
Rack tray
Connect the ground wire to the ground bolt of the device.
Connect a network port to a network outlet.
Depending on onsite conditions, connect another network port to a network outlet. If all
network ports are in use, ensure that each of them is located on a unique network segment.
You are advised to use RJ-45 network cables.
Connect the device to a display that provides an HDMI and/or VGA port.
Connect the power cable to a power outlet.
After this, the device is powered and switched on. 6.
7.
8.
9.
【
Note
】
You can connect the device to other devices (for example, a speaker). However, this
document does not provide the corresponding details. If you are experiencing trouble
connecting the device to other devices, contact the local authorized Kedacom agent.