Kedacom NVR1827, Руководство по установке

Страница: 18 / 28

7
4. Install the disk support back to the device.
①
②
Put the disk support back
to the original position.
Secure the disk support to the device.
5. Connect an HDD power wire and an HDD data wire to the HDD.
Repeat this step for all the HDDs you want to install.
Before installing the cover back to the device, ensure that no dust or particle is left inside
the device.
The device is equipped with a fan. However, the fan can draw dust and other particles,
causing contaminant buildup inside the device, which can result in system malfunction.
Use a screwdriver to install the cover back to the device.
Warning:
The device does not support hot swapping for HDDs, indicating that you must power off
the device before you can install or uninstall HDDs.
6.
2 Installing the Device
You can either place the device on a flat surface or install the device in a 19-inch rack in a well
ventilated area. To install the device in a 19-inch rack:
Choose a suitable location for the rack that is near a grounded power outlet.
Ensure that the rack is at least 0.6 m far away from the wall.
Leave at least 1.5 m of space in the front of the device.
Install the rack tray provided by the rack manufacturer. 1.
2.