Face Recognition Access Control System User Manual
4)
Select "Auto" or "Manual" for mapping mode. When selecting “Manual”,
enter “External Port Number” manually;
5) Click "Save" to validate setting.
3.3.3.7
SMTP
SMTP stands for Simple Message Transfer Protocol. When an alarm is
triggered, the system will send email notification automatically through SMTP
protocol. Configuration steps are as follows:
1) Go to
Settings > Network > Other Protocols > SMTP
;
Picture 3-32 SMTP
2) Input SMTP server IP address and port number, which ranges 1 ~ 65535,
25 by default;
3) Input "Sender" and "Sender Address"; optionally select "Server
Authentication" and input correct user name and password;
4) Input email topic; optionally select "Attachment" and choose attached file
format, then the email sent will attach the relative file;
5) Add receiver email address. Input the receiver's email address and click
the symbol "+" behind it and the address will be saved to the list below.
Select an address from the list and click the symbol "-" to remove the
email address;
6) Click "Save" to validate setting.
Note: This function is available only when email notification is enabled.
