Face Recognition Access Control System User Manual
1)
Configure the IP address of PC in the same network segment as that of the
camera and input the camera address
http://device IP address:8080
in browser.
The device activation interface will pop up, as shown below:
Picture 3-3 Activate through browser
2)
Configure admin user password and email for claiming password. Click
“Activate” to activate the device.
Activate through device
Start the device and it will prompt
“Local Activation” automatically. Operate
according to the prompts to finish activation. Please refer to chapter
2.1.1 Local
Activation
for details.
Note:
To ensure the safety of device on internet, it is strongly recommended that you
set a strong password composed of at least 2 kinds of the following, numbers,
upper-case letters, lower-case letters or specific symbols with length of 8 to 16
characters.
Please modify the password periodically such as once every 3 months. If the
device is used in highly risky environment, suggest modifying the password
monthly or weekly.
Please keep your username and password safe.
3.1.2
Configure Network Parameters
After activating the camera, modify camera network parameters through IPCSearch,
such as IP address, subnet mask and gateway.
1)
Run IPCSearch and the system will search the cameras in LAN automatically and
display the result on the list;
