Vehicle PTZ Camera
User Manual
37
37
Picture 5-2 AP Mode
1) Search the wireless signal
sending out from the camera. The default SSID is “I
XXXXXXXXXXXX (wired
MAC address)” such as IPCamera001410111e63. After editing device
name, the system will replace the IPCamera in SSID with the new name.
2) Open browser and input the IP address (default is 192.200.1.200) to go to the login interface. Input
user name and password (admin/ admin123) to login.
Note: If logging in to a non-activated device for the first time under AP mode, you need to activate
the device on the web client first.
ATTN: Under AP mode, it will search only the AP hotspots existing before the camera is booted.
STA Mode
1) Select the wireless router to connect to. Click the
button on the right of the router name and
enter the window of
“
Add Connect
”, as shown below.
