z
The height character “H” on the screen will blink showing the next measurement to take. Press
READ key to take height measurement, the result will be displayed on the screen. (Step 3);
z
The volume character "
"on the display will blink, Pressing READ key to take the
volume result and display on the lower portion of the screen. At this moment, the "
"icon
won’t blink again. (Step 4);
z
Press the READ key again will toggle back and forth between the length and width, height,
volume measurement result and corresponding icon "
" "
" "
" and "
"will display and blink with the frequency of 2Hz on the screen, meanwhile the
measurement won’t work.
z
Press MODE key to clear the data on the screen, and then can begin the new calculation of
volume;
Addition of volumes under volume mode:
z
Press M key to save the calculated volume on the lower portion of the screen, and the “M+” icon
will appear on LCD;
z
Press MODE key again to begin the second time measurement and computation (Follow step 1,2,
3 an 4 under the volume section).
z
After getting the calculated volume of second time, press +/= key to enter the addition mode. A
9
