(1) QUICK VIEW Button
Press the Q. VIEW button
on the Remote Control.
The previously viewed channel will appear on the screen.
Press Q.VIEW again to switch back to the original channel.
(2) DISPLAY Button
Press the DISPLAY button
on the Remote Control.
The Program Source (Channel #, A/V1, A/V2 or A/V3) you are viewing and the setting of the
SLEEP TIMER will be displayed as shown.
(3) SLEEP Button
You can select a time period between 15 and 180 minutes after which the LSM104 will automati-
cally switch to power-off mode.
Repeatedly pressing the SLEEP button on the Remote Control cycles the SLEEP timer as
shown below.
NOTE :
To cancel the sleep timer function, press the SLEEP button repeatedly until the word "SLEEP
OFF" is displayed.
24
OTHER USEFUL FUNCTIONS
45
TV
SLEEP 30
OFF
15
30
45
60
90
120
150
180
The STATUS button on the Remote Control lets you select between a CUSTOM adjustable picture set-
ting mode or any one of 3 factory preset picture modes.
Pressing the PICTURE button repeatedly changes the mode as follows:
(1) CUSTOM mode
(2) STANDARD mode
(3) DYNAMIC mode
(5) NO DISPLAY
(4) MILD mode
PICTURE
MODE
Select this mode to view a picture that may be adjusted to your
own personal taste.
Note: While picture adjustments may also be made in the other 3
modes, adjustments will only be stored in memory in CUSTOM mode.
Select this mode to restore picture adjustments to the normal facto-
ry-preset mode.
Select this mode to view a powerful and clear picture. This mode is
intended especially for viewing in brighter (daylight) environments.
Select this mode to view a milder picture. This mode is intended
especially for viewing in darker (nighttime) environments or to
lessen eye fatigue.
STANDARD
CUSTOM
DYNAMIC
MILD
23
STATUS BUTTON
