ASSEMBLY INSTRUCTIONS
This manual has been prepared to aid you in the setup
and operation of your KEBBY POWER CRIMP.
The following chapter will guide you through the assembly.
STEP 1: Connect the Power Crimp Hose Assembly to the Power Crimp as follows:
Step #1: Install the hose fitting onto the Power Crimp adapter.
Step #2: Place a 1/2” open-end wrench on the adapter of the Kebby Power
Crimp. Hold the 1/2” wrench stationary and tighten the hose fitting.
NOTE: Do not over tighten the fitting. Minimum pressure is needed to
secure the fitting.
FIGURE 1-2
8
KEBBY INDUSTRIES
ASSEMBLY
Содержание A10001
Страница 2: ......
