Kebby A10001, Руководство по установке и эксплуатации

Страница: 7 / 20

KEBBY INDUSTRIES 5
CAUTIONS AND WARNINGS
• Inlet pressure should never exceed 250 psi.
• Operator is recommended to disconnect air prior to changing
Power Heads, Power Crimp, or cleaning.
• Do not place fingers, hands, or anything in pinch areas.
• All hoses must be kept away from sources of heat that may cause
them to melt.
• Hoses must not be a trip hazard.
• Warning labels must be left on the machine.
OCCUPATIONAL SAFETY AND HEALTH ACT
This unit complies with the Occupational Safety and Health Act of 1970
standards where the requirements are specific. The balance of the standards
are complied with as interpreted by Kebby Industries. Since these standards
are continually evolving, and since they are subject to considerable
interpretation by a third party, Kebby Industries cannot guarantee or warrant
compliance with the provisions or standards of O.S.H.A. or any regulations
issued under that statute.
THIS WARNING SIGN IS A REMINDER
THAT THERE IS DANGER TO
PERSONNEL. BE VERY CAREFUL!
CARE MUST BE TAKEN OR EQUIPMENT
MAY BE DAMAGED.
WARNING
CAUTION
INTRODUCTION AND SAFETY