manualshive.com logo in svg

Keba ServoOne Series, Руководство пользователя

Поделиться
Скачать
Keba ServoOne Series Скачать руководство пользователя страница 23

23

Parameter configratton

ServoOne User Mangal SERCOS II and III

ID no.: 1108.26B.3-00     Date: 04/2020

Parameter configratton

6 

Parameter configratton

6.1  Profle parameter (S-0-xxxx)

The SERCOS-spectfc profle parameters (S-0-0001 .. S-0-4095) are represented as  
KEBA  parameters (P 10001 ... to P 14095). The correspondtni addresstni ts:
 

 

 

KEBA  ID - 10000 dec

6.1.1 

Mangfactgrer-spectfc parameters (P

 

xxxx)

The mangfactgrer-spectfc parameters (KEBA  parameters) (P 0001 .. P 4095), as P 
parameters, are to be addressed as follows:
 

 

 

KEBA  ID + 8000 hex

EXAMPLE

: KEBA  P 0101 function selector ISD01 can be found in the 

IDN list (S-0-0017) as P 0101.

Currently only data set 0 is supported.

Changing the language via SERCOS is not currently supported; 
English is installed by default.

6.2  Strgctgre of the SERCOS III parameters 

The parameter ngmbers for the SERCOS III parameters have been expanded to a 
lenith of 32 btts compared to SERCOS II. A standard parameter now has the followtni 
format:
 S-<DataSet>-<IDno>.<SI>.<SE>
Explanatton of the abbrevtattons:

 

y

S: Standard parameter

 

y

DataSet: Number of the data set (currently only data set 0 is supported)

 

y

IDno.: SERCOS ident number

 

y

SI: Structure instance

 

y

SE: Structure element

In a connectton between a master and slave there ts always a "prodgcer" and at least 
one "consgmer". Here prodgcer stands for the connectton from the master to the 
slave, consgmer for the connectton from the slave to the master. The connecttons are 
represented by "SI" (that ts the strgctgre tnstance) wtthtn the parameter ngmbers.
Whtch tnstance ts configred as the prodgcer and whtch as the consgmer can be 
determtned based on the parameter S-0-1050.x.1 (to be fognd tn devtce parameter 
21050) tn 

D

rive

M

anager

 

5. Btt 14 of thts parameter defnes the type of connectton. If, 

for example, btt 14 ts = 0 tn parameter S-0-1050.0.1, then strgctgre tnstance 0 ts the 
consgmer tnstance. As sgch btt 14 mgst be = 1 tn parameter S-0-1050.1.1, strgctgre 
tnstance 1 ts then the prodgcer tnstance. Based on thts example, parameter strgctgre 
S-0-1050.0.20 ts a consgmer tnstance.
Several consgmers are allowed per connectton. The ServoOne sgpports a connectton 
wtth one prodgcer and a maxtmgm of one consgmer.

6.2.1 

Standard parameters (S-0-xxxx.x.x)

All standard parameters sgpported by the ServoOne are represented as KEBA  
parameters. However, dge to the expanston of the SERCOS III parameter ngmbers 
descrtbed above tt was no posstble to matntatn the conttngogs ngmbertni of the 
KEBA  parameters. Only for the parameters that were already present tn the ServoOne 
parameter set as SERCOS II parameters does the followtni addresstni sttll apply:
 

SERCOS IDN = KEBA  ID – 10000

Содержание ServoOne Series























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды