Keba ServoOne CM Series, Руководство по эксплуатации

Страница: 42 / 70

42
Electrical installation
Operation Manual ServoOne CM-L and ServoOne CM-A
ID no.: 1800.208B.1-00 Date: 03/2020
Electrical installation
4.9.2 Busbars, 24 V control supply from external switched-
mode power supply
1.
2. 3. 4. 5.
6.
24 V DC Netzteil
(Power Supply)
(1) External switched-mode power supply (2) MotionOne CM controller
(3) ServoOne CM-L charging module (4) ServoOne CM-A or ServoOne CM-D
(5) ServoOne CM-C capacitance module (6) ServoOne CM axis controller
Note:
The 24 V busbar fittings are to be tightened to a tightening torque of 2.1 Nm.
Figure 4.18 Busbars, 24 V control supply from external switched-mode power supply on
24 V DC input X2
CAUTION! Damage to the drive system due to incorrect wiring!
Carelessness may result in damage to the device.
x Use the connection elements supplied (busbars) for the electrical coupling of the devices.
x Make sure that all connections have good contact and are sufficiently secure that they
cannot come loose. Pay attention to the tightening torques for the fittings.
Note:
On the usage of other connection elements (busbars),
KEBA Industrial Automation Germany GmbH does provide any guarantee for
stable, reliable operation.
4.9.1 Busbars, 24 V control supply with SO CM-S
2. 3. 4. 5.
6.
1.
(1) MotionOne CM controller (2) ServoOne SO CM-S switched-mode power supply
(3) ServoOne CM-L charging module (4) ServoOne CM-A or ServoOne CM-D
(5) ServoOne CM-C capacitance module (6) ServoOne CM axis controller
Note:
The 24 V busbar fittings are to be tightened to a tightening torque of 2.1 Nm.
Figure 4.17 Busbars, 24 V control supply with ServoOne SO CM-S switched-mode power supply