Information
System files, which are copied to the directory \windows while installation, do
not remain durably stored. For this reason these files must be copied manually
into the directory \IPSM\windows (if necessary, this directory must be created
by the user). With a restart of Windows CE these files are copied automatically
into the directory \windows. So, these files are again available for the oper-
ating system and are again present also after a restart.
8.4
Saving Files
Files must be saved in the IPSM directory. The contents of other directories
are not saved when the device is turned off.
8.5
Transfering Files
8.5.1
Transfer via external storage device (USB-Stick)
For further information on suitable storage devices please refer to
4.11 "USB memory sticks" on page 37
.
1) Insert the external storage device into a suitable PC.
2) Copy the required files to the external storage device.
3) Insert the external storage device into the KeTop.
4) Copy the required files from "\storage card" or “\hard disk” to "\ipsm".
8.5.2
Transfer via network connection by SMB acces from PC to KeTop
This kind of SMB access is only possible with Windows XP Professional and
some versions of Windows 2000.
chapter 4.7 "Ethernet" on page 33
.
The KeTop must have a valid Ethernet address.
In case there is no DHCP-server in the network, the IP-address can be set via
Start
▶
Settings
▶
Control Panel
▶
Network and Dial-up Connec-
tions
▶
SMSC911X1...
▶
IP Address...
.
To save the IP-address go to
Start
▶
Programs
▶
KETOP
▶
Registry Back-
up
and restart the KeTop. (The Ethernet-connection can be checked with
"Ping".)
The PC now has full access to the directory structure at the KeTop so that all
required files can be copied from the PC to "\ipsm" at the KeTop.
8.5.3
Transfer via network connection by access from KeTop to the PC
chapter 4.7 "Ethernet" on page 33
.
The KeTop must have a valid Ethernet address.
KeTop - Specific Operating Instructions
© KEBA 2009
User's Manual V1.50
95