background image

3.2 

Accessories

3.2.1 

TE 220/A terminal temperature sensor (optional)

The terminal temperature sensor TE 220/A is used for the external cold junction
compensation. It must be used when the temperature lines have intermediate
connections.

Fig.3-2:

View TE 220/A

The TE 220/A can be attached to the terminal in 2 different ways:

Via adhesives

Via cable binders

3.2.2 

Connector strip

Input-/output signals: Standard male connectors with grid dimension 5.08 mm

The following female connectors can be used for the TM 240/A:

Female connector

Color

Order no. Weidmüller

2-pole

sw

BLZF 5.08/2 SN SW - 170769

4-pole

sw

BLZF 5.08/4 SN SW - 170771

6-pole

sw

BLZF 5.08/6 SN SW - 170773

8-pole

sw

BLZF 5.08/8 SN SW - 170775

Information

Larger terminal blocks may be used to group multiple signals. The current
carrying capacity of the terminal block is thus, however, reduced (according
to derating curve of the terminal block manufacturer.)

The appropriate female connectors are not included in the delivery of KEBA,
but can be purchased from KEBA.

The technical data for the terminals are contained in the technical data sheet
of the manufacturer of the female connectors.

For further information see System manual.

Description of the module

TM 240/A, TE 220/A for KeStudio U3

© KEBA 2011

Project engineering manual V1.10

12

Содержание Kemro TM 240/A




























Отзывы: