KEB COMBIVERT G6, Руководство по программированию, Страница: 45 / 60

45
General Control Card Parameters (Operator Functionality)
Id-Text Name Parameter index
os13 operator state 0x208D
Meaning Displays the state of the power unit, as well as the image of the
power unit parameter of the control card.
Type Variable
Data length 8 bit
Access read
Coding
Bit 0 reserved
Bit 1...2 PUConfIDState 0: PU-ID unknown
2: PU-ID OK
4: PU-ID incorrect
Bit 3...5 PU image state 0: PU-Image not init.
1: write PU image
3: PU-Image changed
4: PU-Image init.
5: PU-Image check
6: PU image not available
Bit 6...15 reserved
Standard value: 0
Note -
Id-Text Name Parameter index
os14 store state 0x208E
Meaning Non-volatile parameters are immediately stored by writing of
value "0". After completion of the storage the value jumps to
status "1". If at the end of the download lists in COMBIVIS the
value "0" comes before value "1", COMBIVIS will send the value
as long as the inverter has completed the storing.
Type Variable
Data length
8 bit
Access read / write
Coding 0: busy
1: ready
2: off
Standard value: 1
Note -