manualshive.com logo in svg

KEB COMBIVERT CONTROL G6 VARAN, Руководство по программированию, Страница: 7 / 34

Поделиться
Скачать
KEB COMBIVERT CONTROL G6 VARAN Скачать руководство пользователя страница 7

7

 bASIC SAfeTy INSTRUCTIONS

1.2  electrical connection

 DANGeR

Voltage at the terminals and in the device !
Danger to life due to electric shock !

 

►

For any work on the unit switch off the supply voltage and secure it 

against switching on.

 

►

Wait until the drive has stopped in order, that perhaps regenerative 

energy can be generated.

 

►

Wait untill the DC-Link capacitors are discharged (5 minutes). Verify 

by measuring the DC voltage at the terminals.

 

►

Never bridge upstream protective devices (also not for test purpos-

es).

For a trouble-free and safe operation, please pay attention to the following instructions:
•  The electrical installation shall be carried out in accordance with the relevant re-

quirements.

•  Cable cross-sections and fuses must be dimensioned by the user accordly to the 

specified minimum / maximum values for the operation.

•  Within systems or machines the person installing electrical wiring must ensure that 

on existing or new wired safe ELV circuits the EN requirement for safe insulation is 

still met!

•  For drive converters that are not isolated from the supply circuit (in accordance with 

EN 61800-5-1

) all control lines must be included in other protective measures (e.g. 

double insulation or shielded, earthed and insulated).

•  When using components without isolated inputs/outputs, it is necessary that equi-

potential bonding exists between the components to be connected (e.g. by the equi-

potential line). Disregard can cause destruction of the components by equalizing 

currents.

1.3  Start-up and operation

The drive converter must not be started until it is determined that the installation com-

plies with the machine directive; Account is to be taken of 

EN 60204-1

.

 WARNING

Software protection and programming !
Hazards caused by unintentional behavior of the drive!

 

►

Check especially during initial start-up or replacement of the drive 

converter if parameterization is compatible to application.

 

►

Securing a unit solely with software-supported functions is not suf-

ficient. It is imperative to install external protective measures (e.g. 

limit switch) that are independent of the drive converter.

 

►

Secure motors against automatic restart.

Содержание COMBIVERT CONTROL G6 VARAN



































Отзывы:

Нет отзывов