9
STANDArDS fOr MEcHANIcAL cOMPONENTS
Standards for mechanical components
VDE 0580
Electro magnetic devices and components
DGUV regulation 3 Electrical installations and equipment
DIN 46228-1
Tubular end-sleeves without plastic sleeve
DIN 46228-4
Tubular end-sleeves with plastic sleeve
DIN IEC 60364-5-54 Low-voltage electrical installations - Part 5-54: Selection and erection of
electrical equipment - Earthing arrangements, protective conductors and protec-
tive bonding conductors
EN 60204-1
Safety of machinery - Electrical equipment of machines - Part 1: General requi-
rements (IEC 44/709/CDV)
EN 60529
Degrees of protection provided by enclosures (IP Code) (IEC 60529)
EN 60664-1
Insulation coordination for equipment within low-voltage systems - Part 1:
Principles, requirements and tests (IEC 60664-1)
EN 60721-3-1
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities - Section 1: Storage (IEC 104/648/CD)
EN 60721-3-2
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities - Section 2: Transportation and
handling (IEC 104/670/CD)
EN 60721-3-3
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities; section 3: Stationary use at
weatherprotected locations (IEC 60721-3-3)
DIN 748-3
Cylindrical shaft ends - Part 3: For rotating electrical machinery
DIN SPEC 42955
Shaft extension run out and of mounting flanges for rotating electrical machinery,
frame size larger then 315 - Tolerances, test
DIN EN 50347
General purpose three-phase induction motors having standard dimensions and
outputs - Frame numbers 56 to 315 and flange numbers 65 to 740
DIN 6885-1
Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern
DIN 332-2
Center holes 60° with thread for shaft ends for rotating electrical machines
Содержание COMBISTOP 28
Страница 2: ......
