KEB COMBISTOP 28, Руководство по установке

Страница: 17 / 48

17
PrODUcT DEScrIPTION
2.7 Options
2.7.1 Micro switch
• A micro switch can only be retrofitted if the brake is prepared for it. For
this reason, the variant must be ordered ex works.
• Protection class IP65 is no longer given if the brake is equipped with a
micro switch!
A micro switch can be used to monitor the switching state of the armature (brake open/
closed). The user is responsible to connect the electrical equipment and to evaluate the
signals! The drive control must not allow the motor to start until the armature was attract-
ed by the magnet, i. e., the lining can rotate freely.
1 Micro switch 4 Hexagon head screw
2 Socket head screw 5 Hexagon nut
3 Disc
Figure 2: Brake with micro switch
For mor information on how to check and replace the micro switch, refer to section =>
„4.3 Mikroschalter (Option)“ .