KEB COMBILINE Z2 Series, Инструкция по эксплуатации

Страница: 14 / 54

14
PRODUcT DEScRIPTION
2 Product Description
This instructions for use describe the output filters of the COMBILINE Z2 series. These
are consisting of a motor choke, a capacitor module and an appropriate cable set.
component Material number
Z2 motor choke xxZ2F04-1003
Z2 capacitor module 00Z2G24-xxxx
Z2 cable set 00Z2T09-xxxx
The use of the motor choke is also possible on its own. It reduces the ripple of the motor
current and the dv/dt to protect the motor insulation.
If the capacitor unit is connected downstream, a sine-wave filter is obtained. The sine-
wave filter acts as a low-pass filter for the switching frequency components of the drive
converter output voltage and provides a sinusoidal voltage between the phases.
The components can be combined with each other in such a way that there is an optimal
solution for every application!
2.1 Specified application
The output filters are intended for the installation into electrical systems or machines.
Technical data and information for connection conditions shall be taken from the name-
plate and from the instructions for use and must be strictly observed.
2.2 Unintended use
The operation of our products outside the indicated limit values of the technical data
leads to the loss of any liability claims.