Product description | 3
ma_dr_e6-hf-filter-nb-20337731_en
11
3 Product description
The device series
E6 are
. They serve to comply with normative
limit values of high-frequency, conducted interference voltages at the mains input of the
drive controllers.
The filters consist of an LC network, which has a particularly high attenuation in the entire
frequency range. This reduces the effective leakage current of the drive system.
Device type
HF filter
Series
E6
Design
Side-mounted
E6 filters are characterised by the following features:
• Designed for interference suppression of individual devices.
• They can be used on TN, TT and IT systems.
• Large rated voltage range.
• High saturation strength, designed for shielded motor cable lengths up to 100 m.
• Increasing the interference immunity of the drive controllers.
3.1 Intendend use
The filters of the COMBILINE E6 series are only suitable for use in conjunction with drive
controllers. They are intended for the installation into electrical systems or machines.
Technical data and information for connection conditions shall be taken from the name-
plate and from the instructions for use and must be strictly observed.
3.2 Unintended use
Operation of our products outside the limits specified in the technical data leads to the
loss of any liability claims and specified approvals/acceptances.
3.3 Part code
1. and 2. digit
Device size
12…33
Input current 12...840 A
3. and 4. digit
Series
E6
COMBILINE E6
5.-7. digit
Version
T60
Complete filter including housing
8. digit
Design / voltage class
1
Back mount filter / 3-phase / 400 V
3
Side mount filter / 3-phase
4
4-conductor filter
5
NHF filter / 3-phase / 400 V
7
DC filter
9. digit
Limit class
0
C1
1
C2
2
C3
A
C2
