KEB C6 P34 PANEL, Инструкция по эксплуатации

Страница: 65 / 98

65
OPEraTING SySTEMS
• The
Clear Command
can reset the Commit without any dependency, but for Ena-
ble/Disable it asks to clear the implicitly set of Commit for volume C:\, too:
Normally you should confirm with “Yes” because the Commit for volume C:\ was only set
to take effect for the change of E:\.
4.4.8 Leave the KEB_Wf_Mgr
A Shutdown or Reboot of the device can be initiated directly from the KEB_WF_Mgr to
take effect for pending boot commands by using the particular buttons.
The program can also be left by the Exit button. In this case the program checks for
pending boot commands and shows if appropriate the following message box:
It is recommended to choose
“yes”
to ensure that no subsequent changes of the sys-
tem are committed accidentally; which could be happened if you quit the message box
with
“No”
.
If you choose “Cancel” the exit of the program is discarded and you can continue to
work in the KEB_WF_Mgr.