KEB C6 P34 PANEL, Инструкция по эксплуатации

Страница: 94 / 98

94
CErTIfICaTION
KEB Automation KG, Südstr. 38, D-32683 Barntrup www.keb.de E-Mail: info@keb.de Tel.: +49 5263 401-0 Fax: -116 Seite: 2 von 2
annex 1
Document-No. / month.year: ce_ca_remv-C6H-a_en / 01.2018
Product type Control type
yy
C6H
xx – xxxx
Control size yy = 00 for Stand Alone PC or
yy = 10 to FF for TouchPanel PC
x = any letter or number
Voltage category 24 Vdc
The conformity of the above given product to the European Directive 2014/30/EU ( for electromagnetic
compatibility ) is given by complete approval / testing to the following European harmonized standards.
For not exceeding the required limits or minimum levels of immunity it is necessary to use observe the
given wiring specifications from available instruction manual.
EN - Norm Text
EN 55032
Version 2015
Electromagnetic compatibility of multimedia equipment – Emission
Requirements
EN 61000 – 3 – 2
Version 2014
Electromagnetic compatibility – Part 3-2 Limits – Limits for harmonic
current emmissions ( equipment input current ≤ 16A per phase )
EN 61000 – 3 – 3
Ausgabe 2013
Electromagnetic compatibility – Part 3-3 Limits – Limits of voltage
changes, voltage fluctuations and flicker in public low voltage
systems, for equipment with rated current ≤ 16A per phase
EN 61000 – 6 – 2
Ausgabe 2005
Electromagnetic compatibility (EMC) – Part 6-2:
Generic Standard – Immunity standard for industrial environment
EN 55024
Ausgabe 2010
+ A1 aus 2015
Information technology equipment – Immunity characteristics – Limits
and methods of measurement
The conformity of the above given product to the European Directive 2011/65/EU ( for restrictions of
the use for certain hazardous substances in electrical and electronic equipment ) is given by
qualification of components and manufacturing process within the ISO 9001 QM system. The
necessary information and declarations are documented and memorized.
The above given product was developed, manufactured and tested within an internal quality
management system. This ISO 9001 QM system was approved by:
Notified body: TÜV - CERT
Adress: Zertifizierungsstelle des RWTÜV
Steubenstrasse 53
D - 45138 Essen
No. of approval 041 004 500
Dated: 20.10.1994
Valid until: December 2018