KEB 7608000-4001, Инструкция по эксплуатации

Страница: 4 / 50

4
PrEfACE
Laws and guidelines
KEB Automation KG confirms with the CE mark and the EC declaration of conformity,
that our device complies with the essential safety requirements.
The CE mark is located on the name plate. The EC declaration of conformity can be
downloaded on demand via our website. Further information is provided in chapter "Cer-
tification".
Warranty
The warranty on design, material or workmanship for the acquired device is given in the
current terms and conditions.
Here you will find our current terms and conditions.
www.keb.de/terms-and-conditions
Further agreements or specifications require a written confirmation.
Support
Through multiple applications not every imaginable case has been taken into ac-
count. If you require further information or if problems occur which are not treated de-
tailed in the documentation, you can request the necessary information via the local
KEB Automation KG agency.
The use of our units in the target products is beyond of our control and therefore
exclusively the responsibility of the machine manufacturer, system integrator or
customer.
The information contained in the technical documentation, as well as any user-specific
advice in spoken and written and through tests, are made to best of our knowledge and
information about the application. However, they are considered for information only
without responsibility. This also applies to any violation of industrial property rights of a
third-party.
Selection of our units in view of their suitability for the intended use must be done gener-
ally by the user.
Tests can only be done within the application by the machine manufacturer. They
must be repeated, even if only parts of hardware, software or the unit adjustment
are modified.
Copyright
The customer may use the instruction manual as well as further documents or parts from
it for internal purposes. Copyrights are with KEB Automation KG and remain valid in its
entirety.
Other wordmarks or/and logos are trademarks (™) or registered trademarks (®) of their
respective owners and are listed in the footnote on the first occurrence.