KEB 00.F4.010-3009, Инструкция по эксплуатации, Страница: 9 / 12

GB 9
To switch an inverter/servo with Memory-Operator into the memory mode
do the following:
ENTER
F/R
+
FUNC.
SPEED
press
Memory Mode
Inverter/Servo in Drive-Mode
To return to the Drive-Mode, do the following:
ENTER
F/R
+
FUNC.
SPEED
press
Inverter/Servo is in the CP-Mode
Inverter/Servo in Drive-Mode
Enter the Drive-Mode password in CP.0
Drive-Mode
The Drive-Mode can not be exited when inverter type
45 (agree with F4-S V1.0) is used
If the STOP-key is pressed when the programmer is switched on, the
software date of the memory operator is shown.
Day Month Year
3.3 Drive-Mode in the
Memory-Operator
3.4 Software Date