KEB 00.F4.010-3009, Инструкция по эксплуатации, Страница: 8 / 12

GB 8
START
STOP
➥
➥
➥
START
STOP
➥
➥
➥
The mode FU_OP (Upload) can be locked, to make sure that the data
stored in the operator can not be overwritten.The status is displayed by
pressing the POWER-ON button and the „FUNC.-key“ simultaneously.
Lock Mode FU_OP:
Enable Mode FU_OP:
enable mode
FU_OP (Upload)
locked the
mode FU_OP
goes back into
normal operation
Locked mode
FU_OP (Upload)
goes back into
normal operation
release of
mode FU_OP
FUNC.
SPEED
➥ ➥
FUNC.
SPEED
➥ ➥
Press
Switch on
Inverter
Press
Switch on
Inverter
START
➥
START
STOP
➥ ➥
➥
➥
START
➥
START
STOP
➥ ➥
➥
➥
To adjust the baud rate of the operator to the baud rate at FU, the operator
can operate with 9600 baud or with 19200 baud. The actual adjusted
baud rate is displayed by pressing the POWER-ON button and the
„START-key“ simultaneously.
Increase Baud Rate:
Decrease Baud rate:
Press
Switch on
Inverter
9600 Baud
increase baud rate
to 19200 baud
goes back into
normal operation
Press
Switch on
Inverter
19200 Baud
goes back into
normal operation
decrease baud ra-
te to 9600 baud
After changing of the baud rate the display of the operator goes into nor-
mal operation.
3.2 Changing of the
Baud Rate
3. Special functions
3.1 Lock Mode FU_OP