As continuous product improvement occurs, specifications may be changed without notice.
DESCRIPTION
The Keating Instant Recovery
®
10×11 BB Fryer consists
of a frying vessel 10"×11", having a splash deck and a
splash back installed in a cabinet equipped with gas
burners and an automatic temperature control mechanism,
all arranged and designed for the proper frying of food.
SPECIFICATIONS
Fryer Vessel
shall be constructed from 18 gauge
stainless steel, shall have a shortening capacity of 26
pounds, shall be equipped with two 18 gauge stainless
steel horizontal heat transfer tubes spaced above the
bottom of the vessel so that the bottom is unheated and
the food particles collecting in this bottom zone are
unheated and therefor do not carbonize. The frying
vessel shall be polished to inhibit carbon build-up and
facilitate easy clean-up
.
The heat transfer tubes shall be
3" wide and 5" high. The bottom of the vessel shall slope
toward the front where it shall be equipped with a 1"
Teflon core
1
/
4
turn, drain valve, so arranged that the
shortening can be drained into a receiving vessel placed in
front of the fryer.
Splashdeck
shall slope toward the shortening containing
vessel.
The splash deck shall be made of 16 gauge 304
stainless steel.
Splashback
shall be made of 18 gauge 304 stainless
steel, shall completely cover the sides of the flue.
Cabinet:
shall be made of 18 gauge stainless steel. The
cabinet shall be rigid in construction and shall have four 8"
adjustable legs. A door made of 22 gauge 304 stainless steel
shall cover the front of the cabinet and shall extend from the
bottom of the fryer to the panel, and above the panel shall be a
canopy. The door shall be the full width of the cabinet. No
additional space is required for the door to open a full 90
degrees. A stainless steel flue deflector is provided for installing
onto the flue back.
Heat Transfer Tubes
to be two, made of stainless steel
polished to a #7 mirror finish.
Thermostat
to be close range, hydraulic type and be
accurate to ±3°F from 300° to 350°F with stainless steel
bulb. Application of this thermostat is patented by
Keating.
Hi-Limit Control
to be manually resettable type with
stainless steel bulb.
100% Safety Shut Off
to be flame switch type with
combination control gas valve.
Melt Cycle
to be standard on "BB" fryers, allowing the
safe melting of solid shortening. Fryer is to be left in the
Melt Cycle mode until oil completely covers heat transfer
tubes.
Indicating Lights & Switches.
Power on switch, push to
light switch, pilot on light, fry off melt switch.
Standard Accessories
to include one pair 4 mesh baskets,
grid screen over heat transfer tubes, drain clean out rod,
sample of Keating Klenzer and Sea Powder.
Electrical Requirements:
Supply Voltage 120V 60Hz.
Control Voltage 24V 60Hz. 120 VAC 9ft. (1.5 m)
grounded cord set provided.
Gas Requirements
to install are 3/4" male NPT connection
and 4" water column pressures natural and 10" for LP gas at
the fryer burner manifold. Supply pressure to fryers must be
7” (natural gas) and 11” (LP) water column.
Special Order Options
may include battery, common
manifold, rear drain, casters, thermostat seals, portable
filter, central filter (CF SE14), cover, full size baskets,
security package, spark ignition.
INST
ANT RECO
VER
Y
®
FR
YER
10×11 BB GAS
Printed in U.S.A.
10x11BBg2006
12/06
Oil
BTU
Ship
Model No. and Description
Capacity
Input
Height
Depth
Width
Wt.
10×11 BB Nat Gas
26 lbs.
54,000
46
1
/
2
"
26
1
/
2
"
12
3
/
8
"
125 lbs.
10×11 BB LP Gas
26 lbs.
50,000
46
1
/
2
"
26
1
/
2
"
12
3
/
8
"
125 lbs.
KEATING OF CHICAGO, INC.
Toll Free 1-800-KEATING
www.keatingofchicago.com
10×11 BB GAS
