When customers choose to use
their own email server as the
email relay, the SMTP section
should be expanded. It can be
expanded by clicking anywhere
on the gray bar.
Once expanded, the appropri-
ate information should be en-
tered from the customer sup-
plied Email server.
4
6
7
Server: hostname or
hostname:port
The Host is the address of the
email server being used to relay
the email alarm. The Port de-
fines the specific port used by
the email server when routing
mail. This is TCP25 by default.
5
Username: Enter the username
for the account being used for
authentication to the email
server.
Password: The credentials for
the Username being used for
authentication.
TLS: This option is selected
when using secure email.
STARTTLS: This option will up-
grade insecure connections to
SSL/TLS.
8
9
10
9
8
11
5
4
6
7
Q.5.42 November 2016
Page 7
KE2 Local Area
Dashboard & Alarms
Overview, Installation, and Setup Instructions
© Copyright 2016 KE2 Therm Solutions, Inc., Washington, Missouri 63090
3
the field expands to enter an
email address as well as define
the From email and Subject line
if desired.
To:
The email addresses receiving the
email alerts should be entered
into this field. Multiple addresses should be separated with
a comma as shown.
From:
If the default sender creates confusion for the party (parties)
receiving the emails it can be changed to reflect the desired
information.
When customers choose to use their own email server as the
email relay, the SMTP section should be expanded. It can be
expanded by clicking anywhere on the gray bar.
Once expanded, the appropriate information should be en-
tered from the customer supplied email server.
3b
3a
3
3a
3b
Sample screenshot
when accessing via
cell phone.
ADVANCED: Consult your IT department for proper set-
tings. KE2 Therm has no way of knowing your settings.
10
11
When the proper information
has been entered, the email ser-
vice can be tested using the Test
button.
Clears alarms on published con-
trollers. Will resend emails for
controllers in alarm.
