Q.5.42 November 2016
Page 11
KE2 Local Area
Dashboard & Alarms
Overview, Installation, and Setup Instructions
© Copyright 2016 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Field Update Process
From dashboard click Manage.
Use current login credentials.
This will bring you to the
Management Console
1
Right click the KE2 banner to
check for updates.
Click Start
4
4
5
Click reboot.
During the update and re-
boot process the LEDs will
blink in sequence.
IMPORTANT: Do not power
cycle the KE2 LDA during this
process.
5
3
1
2
3
2
IMPORTANT: After a Field Update the credentials will change.
Management: ke2admin
ke2admin
ModBus:
ke2admin
ke2admin
Wireless:
Will remain the same as the label on KE2 LDA with ver-
sion 1.0 Firmware. On later versions it will maintain the
current settings.
Refer to page 8 to change credentials.
