KDS KDS-7XII, Инструкция по эксплуатации

Страница: 12 / 24

KDS-7XII Radio Remote Control System
-11-
Figure 7 - End point adjustment
Note: about K-7XII, the end point value in both directions of channel can be adjusted
independently, and “+” and “-” represent respectively both directions
6.3 Sub Trim Setting

Press UP or DN to change channel index from "CH1" to "CH7".

Press INC or DEC to modify the value between "-100" to "+100", default value is 0.
Figure 8 - Sub trim setting
6.4 Dual Rate Setting
DR switch control the dual rate of aileron, elevator and rudder. And the rate of aileron, elevator
and rudder can be set independency.

Press UP or DN to change channel index between "Aileron ", "Elevator" and "Rudder" as
Table 6.

Press INC or DEC to modify the value between "0" to "+120". Default value is 100 for DR
SW=0, 60 for DR SW=1.
Channel index
End point value
Menu caption
End point
rudder
Channel index Sub trim value
Menu caption