KDS KDS-7XII, Инструкция по эксплуатации

Страница: 10 / 24

KDS-7XII Radio Remote Control System
-9-
ID
GEN
Regenerating ID of transmitter See section 17
Table 3 - Details of system setting
6 Helicopter Mode
HP1, HP2 and HP3 are HELI mode. In this mode, the LCD will display like following:
Figure 5 - HELI mode
In HELI mode, the corresponding content of each channel shown in Table 4.
Channel Control Description
1 AIL Aileron
2 ELE Elevator
3 THR Throttle
4 RUD Rudder
5 GY Gyro
6 PIT Pitch
7 AUX Auxiliary
Table 4 - HELI mode Channels list

Press MENU will enter setting mode. In HELI mode, there are 11 items which can be set, see
Table 5. During setting, you can press MENU to change settings, or press ESC to exit setting
and return to using mode.

Press UP or DN can switch the display "Model status" between "Model No." and "Model
type"

Press INC or DEC can modify the "Throttle Timer"
Index Caption Description
1 REV Channel reverse setting
2 EPA End point adjustment
3 TRM Channel sub trim setting
4 D/R Dual rate setting
5 EXP Exponent setting
Model status
Battery voltage
Mix control status
Throttle timer