32
working
mode
is
changed
.
See
4.2.2
for
more
details
,
and
see
following
items
√
Flymentor 3D
will
take
effect
in
several seconds by degrees after helicopter take off.
√
The environment temperature may change sharply (for example, from your car to
ground), please leave helicopter and Flymentor 3D
in
the
flying
environment
for
five
minutes
at
least
before
power
on
.
√
Serious vibration may exist
,
refer
to
previous
question
.
Q:
There are
drifting
after
turning
A:
Check following items
√
The sensor may not be mounted
horizontal
,
√
You are flying a helicopter with large attack angle rotor
√
Confirm the neutral signal of transmitter is 1.5ms
√
Keep helicopter static
.
Check the tail pitch is fixed. If the tail pitch is moving when
helicopter static, make fine tune of rudder to stop it.
Q:
There
is
drifting when changing between hover and invert hover
A:
Check following items
√
Try adjusting parameters of '
Neutral roll attitude
'
√
The speed of rotation of helicopter may exceed 360
°/
s
You may execute a serial aerobatic flight.
KDS Flymentor 3D
User
Manual
07-17-平衡仪说明书(英文).pdf 35
2009-8-3 15:06:49
