KDS Flymentor 3D, Руководство пользователя

Страница: 23 / 35

20
2
）
Turn on transmitter, ensure throttle stick on lowest position.
3
）
Place helicopter on a horizontal surface, power up.
4
）
Wait for Flymentor 3D initialization finished.
5
）
Move each stick, record the reaction of swash plate.
6）
If the reaction is wrong, connect Flymentor 3D with computer
,
change reverse setting
and save
. (
You can keep connection when do sticks
-
testing
)
7
）
Repeat step 3, 4, and 5 until all reactions are correct
.
*
Attention
:
to avoid injury
,
please unmount main rotor and shut off power
!
3.5.2 Stick travel
Set stick travel as following steps:
1) Ensure Flymentor 3D is mounted well
,
and all electronic devices have been connected
successfully
.
2) Turn on transmitter, ensure throttle stick on lowest position.
3) Place helicopter on a horizontal surface, power up.
4) Wait for Flymentor 3D initialization finished
.
5) Move each stick to its extreme position, record the move range of swash plate.
6) If the range is not suitable, connect Flymentor 3D with computer
,
change reverse setting
and save it
. (
You can keep connection when travel
-
testing
)
7) Repeat step
3, 4
and
5
until all reactions are correct
.
*
Attention
:
to avoid injury
,
please unmount main rotor and shut off power
!
KDS Flymentor 3D User Manual
07-17-平衡仪说明书(英文).pdf 23 2009-8-3 15:06:47