7
Fix the Hanger Plate Assembly to the concrete ceiling and tighten the supplied Carl Bolt, Plain Washer, Spring Washer
and Hexa Nut refering to the numbers given. No.1 Carl Bolt is used for Safety Wire.
安裝吊板組件至混凝土天花板並依照所給的號碼鎖緊附帶的卡爾螺栓、普通墊圈、彈簧墊圈及六角形螺帽。1 號卡爾螺
栓用於保險線。
3
1
2
5
4
Hexa Nut /
六角形螺帽
Spring Washer /
彈簧墊圈
Carl Bolt /
卡爾螺栓
Plain Washer /
普通墊圈
4
4
Fix Hanger Plate Assembly correctly to the concrete ceiling, and tighten Hexa Nut fi rmly.
Can cause injury if Ceiling Fan drops.
將吊板組件正確地安裝於混凝土天花板，並鎖緊六角形螺帽。
若吊扇掉落會導致受傷。
WARNING /
警告
Check Point After Install /
安裝後的檢驗點
1. Ensure the Hanger Plate Assembly is securely fi xed on the concrete ceiling. The Carl Bolt, Plain Washer,
Spring Washer and Hexa Nut should be fi rmly tightened for the safety reason. /
確定吊板組件已鎖緊在混
凝土天花板。基於安全理由，卡爾螺栓、普通墊圈、彈簧墊圈及六角形螺帽必須鎖緊。
Check /
檢查
Safety Wire Outlet /
保險線出口
Concrete Ceiling /
混凝土天花板
< This diagram is for viewing purpose only. > / <
此圖只供參考。
>
Do not dismantle Hanger Plate
Assembly as shown in the
picture at right side.
切勿如右圖所示拆開吊板組件。
CAUTION /
注意
M11SU(REVISION)_EN-CT.indd 7
M11SU(REVISION)_EN-CT.indd 7
12/14/2010 12:40:05 PM
12/14/2010 12:40:05 PM
