KBS Gastrotechnik K 331, Инструкция по эксплуатации

Страница: 10 / 29

7
C H A N G I N G T H E O P E N I N G D I R E C T I O N O F T H E D O O R S
It is recommended that changing the opening direction of the doors should be done with a helper.
You will need two spanners No. 8 and No. 10 and a Philips head screwdriver.
When changing the opening direction of the doors, YOU CAN NOT lay the refrigerator horizontally
!
Do the actions below in the order they are listed.
WARNING! Turn off the appliance and pull the plug out of the electricity supply socket.
1. Remove the covers c from the body of the refrigerator and of the inner side of the door. Also
remove the upper bracket 6 together with the nut and washers and the spacer under the
bracket.
2. Remove the door of the refrigerator compartment.
3. Remove the bottom cover 1 .
4. Unscrew the axle 2 from the bottom bracket 7 and put it together with all washers on the
other cabinet side by screwing to the bracket 7 on the opposite side symmetrically to former
position.
5. Hang the door on the axle 2 of bracket 7 .
6. Turn bracket 4 around 180° together with the washers on the axle and the plastic spacer,
transferring the washers to the axle on the other side of the bracket. Once the bracket is
attached to the freezer compartment door, fix it in place on the other side of the refrigerator.
7. Turn the bracket 6 around 180° together with the washers on the axle and the plastic spacer.
Remove the axle and the washers and reattach them on the other side of the bracket. Once
the bracket
6 is attached to the refrigerator compartment door, fix it in place on the other side
of the refrigerator in the uppermost apertures. Use the covers c to cover the bracket and the
remaining space.
8. Remove the bolt covers a and the stoppers b . Remove the screws that hold the handle in
place. Move the handle to the other side and screw them in place. Place the stoppers into the
remaining apertures in the door, and put the screw caps in place.
9. Remove the cover 10 from the bottom cover 1 and insert it to the guides on the other side of
the bottom cover (symmetrically to former position). Insert left and right legs of the bottom
cover
1 (see pic.) and push it until cover fixing.