KBL megaSun Tower Optima, Руководство по эксплуатации

Страница: 11 / 48

EXTERNAL AUDIO SOURCES - LINE IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels. These sources comprise:
• Studio music
• External players such as MP3 players, mobile
phones (cell phones), I-pods, etc.
EXTERNAL 100 V AUDIO SIGNAL ON STUDIO
CHANNEL (OPTIONAL FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal. This
connection must be made by trained service staff.
EXTERNAL PLAYERS WITHOUT BLUETOOTH
A line connection has been integrated into in the head
area near the Interior control panel so that the user can
connect his or her own player such as an MP3 player, an
iPod, etc. Use a standard 3.5mm jack cable (included
if the music option has been ordered). Connect the jack
plug to the earphone jack of your player. Then select
”MP3 ext.” as the audio source from the control
panel of the tanning device before you start play-
ing your own tracks from the player. For devices
with bluetooth playback starts automatically. The
tracks can only be selected via the user’s own
player. The volume can be controlled via the control
panel of the tanning device and also via the correspond-
ing operating elements provided by the user’s player.
Bluetooth connection
To connect an external player (smartphone etc.) wire-
lessly to the solarium an optional bluetooth interface
is available.
CONNECT EXTERNAL PLAYER
A bluetooth connection can be established in standby
and during tanning mode.
Make sure that you are within the recep-
tion area (about 2 meters).
Make sure that your player is configured
to search for other bluetooth devices.
Should this not be the case, enable blue-
tooth manually. To do so, please read the
instructions for your appliance.
• Depending on your settings the search will be
performed automatically or manually. All available
bluetooth devices within reach will be listed after
a short time.
• Among the available tanning devices choose
“megaSun”. In the service menu, a trailing num-
ber (01, 02, 03, ...) can be added to tanning device
name.
• If necessary confirm the shown code and connect
again. Not every smart phone asks for a code.
megaSun 01
megaSun 01
O p e r a t i n g I n s t r u c t i o n s | megaSun Tower Optima
11