KBL megaSun 8000 a Hybrid, Руководство по сборке

Страница: 30 / 68

A s s e m b l y I n s t r u c t i o n s | 7000
α
/8000
α
touch
30
5. Assembly
Assembly basically follows the disas-
sembly steps in reverse order.
Deviations are explained in this chapter.
When installing illuminated decorative
parts, make sure that the connection
cable of the LED strips do not form
shadows.
5.1 Install rear wall
• Install and align rear wall in the
desired location.
Only on level floors with sufficient load
capacity.
• First, leave a little more distance (about
40 cm) to the wall.
• If there is a lack of space, install the
guide plates for the shoulder sections
first -> Refer to 5.4.5).
5.2 Install bass box
PH2
5.2.1 UNPACK ACCESSORIES
Screw set
Bass box
5.2.2 INSTALL BASS BOX IN THE RIGHT-HAND
FOOT OF THE TANNING DEVICE
INSTALL THE BASS BOX
• Unscrew cover plate (8x 4,2x9,5 - PH2).
PH2
• Screw bass box to the carrier plate (2x M6x20 -
PH2).
View: foot outside
View: foot inside
PH2