KBL megaSun 8000 a Hybrid, Руководство по сборке

Страница: 19 / 68

A s s e m b l y I n s t r u c t i o n s | 7000
α
/8000
α
touch
19
• Place the loose cable harness together with the
condensate pump
⑮
and the condensate canister
⑭
in the electronic box.
⑮
⑭
• Have two people lift the electronic box out towards
the front and transport to the installation site.
4.6.4 REMOVE AIR CONDITIONER
• Pull the air conditioner out of the connection cone,
lift it out towards the front and transport together
with the condensate tray to the installation site.
4.7 Remove the bed
PH2 3
Be careful when putting the bed down.
Make sure that the electronic ballast tray of the
bed cannot be pressed in when putting it down.
• Have two foam rubber pads in place before
removing the bed to set it down on (or see
protective padding).
• Place padding under the front and on the
side opposite the ballast tray. -> See sec-
tion 4.7.4
4.7.1 DISCONNECT CABLE CONNECTIONS
• Disconnect plug XL1 – XL5 on the rear wall.