KBL megaSun 8000 a Hybrid, Руководство по сборке

Страница: 20 / 68

A s s e m b l y I n s t r u c t i o n s | 7000
α
/8000
α
touch
20
• Follow the connection diagram on the
rear wall during installation!
4.7.2 REMOVE BED DAMPERS
• Lift the bed in the middle (second person) and
remove the top locking pin of the two dampers
(left/right).
3
• Close the bed, pull both dampers from the bottom
guide and take it out completely.
4.7.3 LOOSEN THE BED
• Slide the bed pane pilot pin
⑫
approximately 30cm
to the right.
⑫
⑫
• Push the two bed holding pins (left/right) with the
screwdriver to the inside and hold them with the
free hand to prevent them from falling.
PH2