Figure 40.1 Four screws of the canopy pane
Figure 40.2 Four screws of the side pane
BED PANE AND DUCTING PANE
Please refer to the following table for the cleaning of
the bed pane and the ducting pane. The electronics
unit underneath the bed must absolutely not get
in contact with any liquid. Therefore, use a slightly
damp microfi bre cloth to clean the underside of the
bed pane and the interior of the bed section. Also
use this cloth to clean the shoulder tanner. Apply
megaClean as cleaning agent (spray onto the cloth).
Procedure
Fig.
1
Lock the canopy in place.
2
Undo the two fl at-head screws on the
right-hand and left-hand side of the bed
pane.
40.3
3
Fold the bed pane up and use the
supplied hooks to attach it to the
canopy.
40.4
4
Use a microfi bre cloth and megaClean
to clean the underside of the bed
pane.
5
If the bed section is equipped with a
ducting pane, the latter can be removed
for cleaning purposes. Carefully re-
place the ducting pane to ensure the
proper cooling of the bed pane. As to
the shoulder tanner, proceed in the
same way.
6
Clean the upper surface of the bed pane
and fi x it again using the two screws.
Figure 40.3. Flat-head screw
Figure 40.4 Hooks for attachment of bed pane
O p e r a t i n g I n s t r u c t i o n s
|
megaSun 5600
40
