Information for the studio
operator
DAILY CHECKS AND BASIC SETTINGS
Please ensure that you check and empty the
condensate tank daily and that you refi ll the
consumables. Please also note the settings you can
make on the service levels of the operating system,
e.g. colour stimulation, Aroma, timer controls, etc.
DECORATIVE LIGHTING
The decorative lighting can be switched on
or off by pressing the “+”....”–”....”+” se-
quence of the body fan as long as there is
no incoming signal from the coin-controlled
timersystem. Make sure that you do not let
more than 1 second elapse between the in-
dividual keystrokes. Also note that you can set two
cycles of operation of the decorative lighting for each
day of the week.
ERROR MESSAGE “EXHAUST AIR”
This error message is displayed and can be
acknowledged by pressing the “Stop” button.
The Service staff must have eliminated the cause of
the message previously.
This message is displayed as a result of:
excessive temperature inside the tanning unit, or
defective exhaust air fan.
O p e r a t i n g I n s t r u c t i o n s
|
megaSun 5600
23
