SAFETY PRECAUTIONS
7
Prior to operation
1. Contact an installation specialist for installation.
2. Make sure the unit is grounded efficiently.
3. Do not use a damaged or non-standard power cord.
4. Do not share the same outlet with other appliances.
5. Do not use an extension cord.
6. Do not start/stop operation by shutting off the power supply.
Usage
1. Exposure to direct airflow for an extended period could be hazardous to your health.
Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or
other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision
devices, food, pets, plants, and art objects). Usage in such a manner could harm such property.
Cleaning and maintenance
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling
sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and circuit breaker are turned off.
Service
For repair and maintenance, contact your authorized service dealer.
Operating temperature
Mode
Temperature
Cooling operation
Heating
operation
Drying operation
Room temperature
17ºC~32ºC/62ºF~90ºF
0ºC~30ºC
/32ºF~86ºF
17ºC~32ºC/62ºF~90ºF
Outdoor temperature
0ºC~50 ºC /32ºF~122ºF
-15ºC~ 24ºC
/5
o
F~76
o
F
0ºC
~50ºC
/32
o
F~122
o
F
(-15
ºC
~50
ºC
/5º
F
~122º
F
:
For the models with low
temperature cooling system)
CAUTION:
1. If air conditioner is used outside of the above conditions, certain safety protection features may
come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this figure,
the surface of the air conditioner may attract condensation. Please set the vertical air flow louver
to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within this operating temperature.
