Kaysun KPDHF-112 DN3.0, Руководство по установке

Страница: 13 / 28

installation manual
11
7. DUCT DESIGN
Cover the pipe before connecting to keep rubbish, dust or other
impurities out.
As there is no dust filter on the indoor unit, other places which
are easy to maintaining such as inhalant duct should be
installed with dust filter. (Without dust filter, dust adherent on
the air heat exchanger may cause failure and water-leak.
Key points of duct connection
Canvas tie-in Canvas tie-in
Fig.7-1
Other assemblies should be prepared on spot except air
conditioner main body.
Middle fan speed
High Static Pressure Type
● 7.1KW/8.0KW model fan curve, the static pressure refer
to Table.12-2 .
High fan speed
Fig.7-3
Fig.7-2
Low fan speed
Fig.7-4
Isolation booth
Air outlet
Isolation booth Air inlet
Air dust filter
NOTE