background image

 Page 4 

Read Safety Precautions Before Operation and Installation

Incorrect installation due to ignoring instructions can cause serious damage or injury. The se-

riousness of potential damage or injuries is classified as either a WARNING or CAUTION.

WARNING

This appliance can be used by children aged from 8 years and aboce and persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning 

use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. 

Cleaning and user maintenance shall not be made by children without supervision (EN Standard requirements).
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not 

play with the appliance (IEC Standard requirements).

WARNING FOR PRODUCT USE

•  If an abnormal situation arises (like a burning smell), immediately turn off the unit and disconnect the power. Call 

your dealer for instructions to avoid electric shock, fire or injury.

• 

Do not insert fingers, rods or other objects into the air inlet or outlet. This may cause injury, since the fan may be 

rotating at high speeds.

• 

Do not use flammable sprays such as hair spray, lacquer or paint near the unit. This may cause fire or combustion.

•  Do not operate the air conditioner in places near or around combustible gases. Emitted gas may collect around 

the unit and cause explosion.

•  Do not operate your air conditioner in a wet room such as a bathroom or laundry room. Too much exposure to 

water can cause electrical components to short circuit.

•  Do not expose your body directly to cool air for a prolonged period of time.

•  Do not allow children to play with the air conditioner. Children must be supervised around the unit at all times.

•  If the air conditioner is used together with burners or other heating devices, thoroughly ventilate the room to avoid 

oxygen deficiency.

•  In certain functional environments, such as kitchens, server rooms, etc., the use of specially designed air-

conditioning units is highly recommended.

CLEANING AND MAINTENANCE WARNINGS

•  Turn off the device and disconnect the power before cleaning. Failure to do so can cause electrical shock.

•  Do not clean the air conditioner with excessive amounts of water.

• 

Do nott clean the air conditioner with combustible cleaning agents. Combustible cleaning agents can cause fire or 

deformation.

CAUTION

•  Turn off the air conditioner and disconnect the power if you are not going to use it for a long time.

•  Turn off and unplug the unit during storms.

•  Make sure that water condensation can drain unhindered from the unit.

•  Do not operate the air conditioner with wet hands. This may cause electric shock.

•  Do not use device for any other purpose than its intended use.

•  Do not climb onto or place objects on top of the outdoor unit.

•  Do not allow the air conditioner to operate for long periods of time with doors or windows open, or if the humidity 

is very high.

Safety Precautions

      WARNING

This symbol indicates the possibility od personnel injury

      CAUTION

This symbol indicates the possibility of property 

damage or serious consequences.

Содержание KAY-CF 26 DR9





































Отзывы: