Kaysun COMPAK KHP 15/190 ACS1 Скачать руководство пользователя страница 6

Страница: 6 / 24

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabili-

ties, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the

appliance.

Do not turn off the power supply.

System will stop or restart heating automatically. A continuous

power supply for water heating is necessary, except service and

maintenance.
If the unit has not been used for a long period of time(2 weeks or

more), hydrogen gas will be produced in the water piping system.
Hydrogen gas is extremely flammable. To reduce the risk of injury

under these conditions, it is recommended that open the hot water

tap for several minutes at the kitchen sink before using any

electrical appliance connected to the hot water system. When

hydrogen is present, there will probably be an unusual sound such

as air escaping through the pipe as the water begins to flow. There

should be no smoking or open flame near the tap at the time it is

open.

If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified

person.

DISPOSAL Do not
dispose this product as

unsorted municipal waste. Collection of such waste

separately for special treatment is necessary.

Do not dispose of electrical appliances as unsorted

municipal waste, use separate collection facilities.

Contact your local government for information

regarding the collection systems available.

2. BEFORE INSTALLATION

If electrical appliances are disposed of in landfills or dumps,

hazardous substances can leak into the groundwater and get

into the food chain, damaging your health and well-being.

2.1 Unpacking

2.1.1 Accessories

Table2-1

CAUTION

Accessory Name

Qty. Sharp

Purpose

Owner’s & Installation
Manual

Installation and use instruction

This manual

The earthing pole of socket must be grounded well, make
sure that power supply socket and plug are dry enough and
connected tightly.

Prevent water from

flowing backwards

One Way Valve

How to check the power supply socket and plug are qualified?
Turn on power supply and keep the unit running for a half
hour, then turn off power supply and plug out, check whether
the socket and plug is hot or not.

Pipe

short

for

Discharge condensated water

water condensation
Drain pipe for

water condensation

Before cleaning, be sure to stop the operation and turn the
breaker off or pull out the power plug.
Otherwise, an electric shock and injury may be caused.

Filter
Ring

1
2

To connect to a remote

shutdown switch

White wires

Water temperature over 50

can cause severe burns instantly

2.1.2 How to transport

or serious injuries from scalds.
Children, disabled and elderly

are at highest risk of being

scalded. Feel water before
bathing or showering.
Water temperature limiting
valves are recommended.

1) In order to avoid scratch or deformation

of the unit surface, apply guard boards
to the contacting surface.
No contact of fingers and other things
with the vanes.
Don’t incline the unit more than 75°
in moving, and keep it vertical when
installing.

2) This unit is heavy, it need to be carried by two or more persons,

otherwise might cause injury and damage.

>75°

Gradient limit>75°

Do not operate the unit with a wet hand.
An electric shock may be caused.

The installation height of power supply should be over 1.8m, if
there is any water spattered, separate the power supply from
water.

2.2 Location requirements

1) Enough space for installation and maintenance shall be

preserved.

A one-way valve must be installed on the water inlet side,
which is available from accessories, see manual "accessories"
part.

2) The air inlet and outlet should be free from obstacles and strong

wind.

3) The base surface should be flat, surface should be inclined no

more than 2°and able to bear the weight of the unit and suitable

for installing the unit without increasing noise or vibration.

It’s normal if some water drops from the hole of PT valve
during operation. But, if there is a great amount of water, call
your service agent for instructions.

4) The operation noise and air flow expelled shall not affect

neighbours

After a long term use, check the unit base and fittings.

If damaged, the unit may sink and result in injury.

5) No flammable gas is leaked nearby.

6) It is convenient for piping and wiring.

Arrange the drain pipe to ensure smooth draining.

Improper drainage work may cause wetting of the building,

furniture etc.

7) If it is installed in indoor space, it might cause indoor temp

decreased and noise. Please take preventive measures for this.

Do not touch the inner parts of the controller.