12
Step 3
Place square end caps 25 mm (35) in
the ends of the backrest tube (9).
Fasten the backrest tube (9) in the
welded bar on the middle bracket (3).
Secure with screw (10), nut (17) and
washer (20). Fit the backrest (7) on the
backrest tube (9). Secure with screw
(15) and washer (22). Fit the seat (8) on
the middle bracket (3) and secure with
screw (14) and washer (22) as per
diagram.
Step 4
Fit square end caps 30 mm (34) in
both ends of the pec arm (6).
Insert the foam roller holder (28)
through the hole in the pec arm
(6). Fit the foam roller (29) and
round end cap 19 mm (37) on the
foam roller holder (28). Insert the
screw (11) through the pec arm
(6), washer (20) and round
bushing (36). Secure with nut (23)
as per diagram.
Step 5
Fit the round damper 25 mm (31),
round end cap 25 mm (38) and
square end cap 30 mm (34) on
the leg lift arm (5) as per diagram.
Insert the foam roller holder (27)
through the hole in the leg lift arm
(5). Fit the foam roller (29) and
round end cap 19 mm (37) on the
ends of foam roller holder (27). Fit
the leg lift arm (5) on the middle
bracket (3). Secure with screw
(12), nut (17) and washer (20) as
per diagram.
