11
ENG LI SH
Read the User instructions carefully before use!
Note!
Max. total load for angled back support is 120 kg.
ASSEMBLY
Step 1
1.
Fit square end caps 38 mm (33) in
the ends of the weight pillar (1) and
fit the plastic bushing (32) on the
round end of the weight pillar (1). Fit
the support bar (2) on the weight
pillar (1) and secure with screw (13),
nut (18) and washer (21) as per
diagram. Insert the safety catch for
the barbell (24) in the hole in the
weight pillar (1). Secure with nut (19)
and washer (22) as per diagram.
2.
Fit round end caps 19 mm (37) in
both ends of the support bar for the
backrest (39). Insert the support bar
for the backrest (39) in the hole in
the weight pillar (1) as per diagram.
Step 2
Place square end caps 38 mm (33)
in the ends of the front leg (4).
Fasten one end of the middle
bracket (3) in the front leg (4) and
secure with screw (25). Place square
end cap 38 mm (33) in the end of the
middle bracket (3). Fasten the
support plate (30) in the middle
bracket (3) and front leg (4). Secure
with screw (16), nut (18) and washer
(21). Fasten the other end of the
middle bracket (3) in the support
tube (2). Secure with screw (13), nut
(18) and washer (21) as per
diagram.
