EN
51
• Check that the tyre pressure is correct.
• Check that the battery contactors on the
frame are clean and free from oxide.
• Check that the battery is sufficiently
charged.
• Check that the lights are working properly.
• Check that the front and back brakes are
working properly.
• Check that the wires are well lubricated and
that the brake pads are in good condition.
• Make sure not to use too much lubricant,
otherwise there is a risk of it accumulating
on the brakes and reducing the braking
power.
• Check that the welds on the frame are in
good condition and free from rust.
CLEANING
• Do not clean the bike with a high-pressure
washer – risk of water and moisture
penetrating into the electrical components
and motor.
• Use a damp sponge with a mild detergent
when cleaning. Do not use acidic
detergents, they can damage the bike.
Содержание 005023
